You will find all information in the shop under the section "ground - deep cleaning".  There we distinguish between the basic cleaning of water-resistant floors and carpets.

See also the application overview of our products for basic cleaning.

For an overview of all floor-cleaning products, including application recommendation, consult our website in the section "janitorial-hygiene".

Application overview floor maintenance cleaning

Sealed parquet floors clean only damp with a neutral floor cleaner, for example floorstar ECO. Make sure not to allow moisture in the cracks or let it sit on the floor. To protect the seal, we recommend coating with SIVEX.

Warning: Please never use abrasive products on your hardwood floor.

 You can find an overview of our floor cleaning and grooming products here.

A terracotta floor is formed from bricks ground and fired at a firing temperature of 800 to 1000 degrees Celsius. The color varies from red to brown. Mostly it is unglazed and highly porous. You should wipe the floor regularly with a slightly foaming universal cleaner, for example with hacoGLANZ, or with a cleaning machine. Would you like to care for the flooring? If it is not sealed, apply SIVEX thinly so that dirt cannot collect in the pores. On sealed floors, apply thin layers of BASIS to prevent soiling. This also freshens up the floor.

For the care of porcelain floors, we recommend the specially designed floor cleaner stoneCLEAN. If you are equipped with the integral 2GO SYSTEM, we recommend POWER 2GO for the cleaning and maintenance  of porcelain floors.

For wet cleaning, you can use the easyMOP system with the fitting easyMOP ECO or the profiMOP system with profiMOP ECO. For dry cleaning, we recommend our oilCLOTHs. Warning: Please wipe your hard floors only with low amount of water.

Linoleum floors have a strong odor which is due to the contained linseed oil. Since the odor is lower in coated floors, it is recommended to apply a coating with SIVEX,  BASIS or utilitULTRA.

More information is retrievable in the application overview of our floor products.

For soiling at one specific location use our carpetSPRAY. First vacuum the surface in order to remove coarse dirt . Spray the stain and dab with our blue microfiber cloth safetyWIPE from outside to inside. Then rinse with clear water.

For a large-scale cleaning, we recommend the Queen Bonnet method: First, get the carpet rid of loose dirt by vaccuum cleaning it. Then spray it with cleaner carpetPRO in small sections. Take a single disc machine with a carpetPRO PAD and work backwards with overlapping, parallel paths.

By polishing care films or soap scraps, any unevenness that has been created can be repaired, and the visual appearance the surface can be improved. It shines evenly and thus looks clean and well-groomed. A white PAD in combination with a single-disc machine is to be used.